BMW Injector Coding After Replacement – Remote Service

Have new or suitable replacement injectors been installed? On supported BMW engines, each injector's correction values must be assigned to the correct cylinder in the engine control unit. We carry out this coding remotely after a technical compatibility check.

€59, whether you need one injector or all injectors in the same vehicle coded. Processing takes approximately 20 minutes when all required codes and cylinder assignments are available and the remote connection is ready.

Our service

• Checking the engine, injector variant and required service function.
• Entering the supplied correction values for the agreed cylinders.
• Checking that the values have been accepted and carrying out a final fault-memory check.

What we need

Send the VIN, engine details, clearly readable photos of the injector markings and an unambiguous record of which injector is fitted to each cylinder. The parts must be professionally installed before the appointment. You also need a Windows laptop, internet access, the confirmed diagnostic interface and a suitable power supply.

The coding required varies by engine. We therefore confirm suitability only after checking your vehicle. Selecting an appointment is not mandatory when purchasing; we can arrange the session afterwards.

If the engine is running unevenly

This service does not replace mechanical checks. Coding will not repair faulty injectors, incorrect parts, leaks or other engine faults. Injectors, removal and installation, cleaning and test-bench measurements are not included.

Send your VIN and injector markings for a compatibility check

If the cause of an engine fault is still unclear, see our remote diagnostics with ISTA. General information is available under remote coding.

Frequently asked questions

Can I book without readable correction values?

Please contact us first. We cannot reliably guess missing correction values or which injector belongs to which cylinder.

Does this apply to every BMW or MINI?

No. The procedure and whether coding is required depend on the specific engine and injector system. We confirm suitability beforehand.