After a BMW software update, workshop programming or control-unit replacement, have mirror folding, the digital speed display, start-stop memory or other personalised settings suddenly disappeared? This does not automatically mean a control unit is faulty. First, establish what work was carried out, which control units received new software or data, and whether the missing feature was comfort coding, a retrofit or a separate activation.
This guide explains why coding settings can disappear after an update, when repeat remote coding makes sense and when diagnosis or workshop work is needed instead. Old backups are not blindly written to a new software version. Bimmerfit checks the vehicle, requested changes and current condition before the appointment.
Check missing BMW coding against the current vehicle configuration first
For an initial check, send the last seven VIN characters, the production date, the type of update or workshop work and the features that are missing. If you share any documents, redact your name, address and other personal details we do not need.
- Only comfort settings are missing. If the vehicle otherwise works without faults, targeted comfort coding may be suitable after a check.
- Warning messages or starting problems. Establish the cause first. Remote ISTA diagnostics may help if the vehicle can be reached reliably. If there is no reliable diagnostic connection, have it checked locally.
- Apple CarPlay is missing. Use the CarPlay troubleshooting guide to distinguish connection problems, activation and the fitted iDrive system.
- A control unit was replaced. The control unit replacement guide explains when the part needs checking, coding or adaptation.
We check the vehicle's current configuration before restoring an earlier setting.
Short answer: check the updated vehicle first, then recode specific features
Vehicle programming can reprogram one or more control units and then code them using the stored vehicle order. This can overwrite personalised settings that differ from the intended factory configuration in the affected units. Only some earlier changes may be missing if not every control unit was worked on.
The next step is not a blanket restoration of every old value. First, record fault messages, software version, vehicle order and the features that are actually missing. Then check each feature to establish whether it is still supported on the new software and whether it is technically and legally appropriate.
Maintenance, software updates and coding are different things
- Routine maintenance: An oil service, filter replacement or mechanical work does not normally change personalised coding simply because maintenance was performed.
- Diagnosis: Fault codes and measured values are read and assessed using a test plan. This does not automatically change the vehicle configuration.
- Coding: A control unit is configured for the vehicle's equipment and intended parameters.
- Programming: A control unit's software or data is updated or rewritten. Coding or initialisation may be required afterwards.
- Control-unit replacement: Depending on the module, the replacement part may need programming, coding, adaptation, initialisation or calibration.
In a technical training document, BMW describes complete coding as recoding the installed control units using the vehicle order. Initialisations or system settings can be lost during this process (BMW Training: Coding & Programming – document code ST406, available through BMW Techinfo). This does not mean every personalisation disappears at every workshop visit. The actual measures plan is what matters.
Why do only some features sometimes disappear?
Personalised settings are not all stored in the same place. Mirror, lighting, display, climate-control and head-unit features can depend on different control units. If a workshop procedure only programs or replaces one affected module, settings in other modules may remain unchanged.
A feature can also have several prerequisites. A particular mirror behaviour requires suitable door modules and electric drives. A display option depends on the instrument cluster, software and vehicle configuration. CarPlay can additionally depend on the head unit, Wi-Fi hardware, vehicle-specific entitlement and software version. That is why “put everything back as it was” is not a sufficiently precise request.
Remote Software Upgrade or workshop programming?
Newer compatible BMW vehicles can receive official Remote Software Upgrades wirelessly. BMW describes downloading and starting them directly in the vehicle or through the My BMW App, with update availability and content varying by country, model, equipment and vehicle condition (BMW Remote Software Upgrade). Workshop programming with ISTA and a Remote Software Upgrade are not the same procedure.
The official programming environments also differ between older E-series and MINI R vehicles and F-/G-series vehicles. The BMW Group Techinfo User Guide assigns ISTA/P to E-series and MINI R vehicles and integrated ISTA programming to F-/G-series and newer vehicles. Saying “BMW did an update” is therefore not enough for Bimmerfit's initial check: the invoice or work description, date and current vehicle details are needed.
What information is needed after the update?
- the last seven characters of the VIN, model, model year and production month,
- the date and reason for the workshop visit or Remote Software Upgrade,
- the invoice, job items or measures plan, without unnecessary personal data,
- an exact list of the previous features and those now missing,
- photos of current warning messages, the iDrive version and instrument cluster,
- details of replaced control units, retrofits or previous software flashes,
- any available documentation of the earlier coding.
An earlier wish list is more useful than an unchecked data file. It describes the desired behaviour without assuming which parameter the current software needs.
Why an old backup is not blindly restored
Programming can change the data structure, control-unit software and available parameters. A backup from an older version is therefore not automatically a safe template for the new configuration. Bimmerfit uses relevant old values only for comparison and checks the requested feature again against the vehicle's current data.
This also helps prevent errors being carried over. If the earlier configuration was incomplete, came from another vehicle or contained undocumented changes, it should not be reproduced without checking. The new coding is based on the vehicle, hardware, software and agreed objective—not simply the name of an old backup file.
When is repeat comfort coding enough?
If the vehicle communicates without faults, there are no relevant warning messages, and only previously agreed comfort, display or operating features are missing, recoding can often be the appropriate route. The BMW & MINI comfort-coding package covers this type of work. Before booking, the wish list is checked again against the vehicle series, equipment and current software version.
Typical requests concern mirror behaviour, locking, individual display options or memory functions. These are examples, not a universal availability list. Missing hardware, parameters that are no longer supported and legally required functions are not replaced or bypassed through personalised coding.
When is diagnosis needed first?
If warning symbols appear after an update, the vehicle will not start, a control unit cannot be reached or factory systems no longer work, comfort coding is not the first priority. The cause must be established. BMW's diagnostic training documents explain that programming and coding must follow the prescribed procedures and that a quick single-control-unit function does not replace a complete diagnostic process (BMW Advanced Vehicle Diagnosis – document code ST1102, available through BMW Techinfo).
The BMW remote diagnosis with ISTA service is suitable for an initial electronic assessment. Remote diagnosis does not replace mechanical inspection, measurements, calibration or workshop approval. In particular, warning conditions involving steering, brakes, restraint systems, the drivetrain, high-voltage systems or anti-theft functions are not concealed by simply coding them out.
Handle CarPlay, navigation and ConnectedDrive separately
If CarPlay, navigation or a ConnectedDrive service is missing after head-unit or vehicle programming, it is not automatically a comfort-coding issue. First, check the head unit, software version, Wi-Fi hardware, market version and legitimate vehicle-specific entitlement. An existing user account or subscribed online service may also sit outside local vehicle coding.
For a compatible NBT EVO with a feature that has not yet been activated, there is a separate Apple CarPlay check and remote activation service. For split-screen or pairing problems, see the CarPlay troubleshooting guide. Bimmerfit does not bypass protected access or offer other parties' licences or account services as its own work.
What should be documented before a planned workshop update?
- Record the current wish list and features with short videos or photos.
- Note existing warning messages and known faults separately.
- Document the iDrive/software display and important retrofits.
- Tell the workshop about technically relevant retrofits and replaced control units.
- Do not prevent a necessary repair or official update solely to preserve comfort coding.
- After collecting the vehicle, test all factory functions and personalised features.
This documentation is not a guarantee that every setting will remain available on a later software version. It does, however, shorten the initial check and help prevent a missing comfort option being confused with a new technical fault.
Which BMW and MINI series can be checked remotely?
An initial check is possible for many BMW E-series models, BMW F-series models and BMW G-series models, as well as selected MINI R and MINI F vehicles. The series alone does not confirm either feature availability or the appropriate connection method.
K+DCAN or D-CAN may be suitable for typical E-/R-series tasks, while ENET is used for many F-/G-series and MINI F vehicles. The cable guide explains the basic distinction. Programming work or particular control units may require additional interfaces and a different power supply.
How the Bimmerfit check works
- Send the VIN, the update work description and a prioritised list of missing features by WhatsApp.
- We distinguish comfort coding, diagnosis, retrofits, activation and possible workshop work.
- Before booking, we tell you which service and cable are appropriate.
- At the confirmed appointment, current software and control-unit data are read.
- Only checked and agreed features are coded on the current configuration.
- Afterwards, test each change and check that no new warning messages are present.
The BMW remote-coding guide explains general preparation, remote access and appointments. A fixed duration or complete restoration is only promised after the actual vehicle configuration has been reviewed.
Frequently asked questions
Is all coding lost after every BMW software update?
No. It depends on which control units were programmed or coded and where the personalised setting was stored. All, some or none of the previous features may therefore be affected.
Can I simply restore my old coding backup?
Not without checking it. The software version and data structure may have changed. The old file is at most a comparison reference; the requested feature is checked again against the current vehicle configuration.
Does a missing feature after an update mean there is a fault?
Not automatically. An overwritten personalised setting can be missing without a hardware fault. Warning messages, unreachable control units or failures of factory functions do, however, need diagnosis first.
Can you always restore CarPlay after an update?
No. The head unit, software, Wi-Fi hardware, market version and legitimate vehicle-specific entitlement must be checked. CarPlay is a separate service, not a simple comfort option.
What does recoding cost?
Several supported comfort features can be bundled in the comfort-coding package after an initial check. Diagnosis, head-unit flashing, CarPlay and control-unit replacement are separate tasks and are identified separately before booking.
Can I avoid a necessary workshop update to keep my coding?
A technically necessary repair or update should not be declined solely to preserve a comfort setting. Discuss the reason for the repair with the workshop and document your wish list beforehand for the later check.
Have your coding checked after an update: Send the last seven characters of the VIN, the date and type of update, and a prioritised list of missing features by WhatsApp. Before booking, we explain whether comfort coding, diagnosis, a CarPlay/head-unit check or workshop work is appropriate.
Bimmerfit is offered by the independent Altin & Yaman GbR and has no commercial affiliation with BMW AG or MINI. The trademarks are used solely to describe the supported vehicles.