Ordinary NBT or NBT EVO? A software flash cannot turn ordinary NBT into NBT EVO ID6. On NBT EVO, ID4 may need a separate flash depending on the hardware; ID5/ID6 alone does not guarantee CarPlay. The actual fitted head unit, software level and Wi-Fi hardware are decisive.
Why the head unit matters more than the display
The visible display is only one part of the infotainment system. The computing unit – the head unit – is located in the dashboard and determines the software platform, functions and communication paths. A vehicle can have a large display and still use CIC or NBT rather than NBT EVO. Conversely, a retrofitted system may differ from the original VIN equipment record.
For CarPlay and software work, the actual fitted system must therefore be identified. Model, year and VIN are the starting point. Main-menu and navigation-version photos, and part numbers where needed, make the assessment considerably more reliable.
The main BMW infotainment systems at a glance
| System | Typical identifying features | CarPlay assessment |
|---|---|---|
| CIC | Older list interface, map and menu design preceding NBT | Not covered by an NBT EVO CarPlay service; a different hardware solution would be needed. |
| NBT | A more modern list view and faster graphics than CIC, but not EVO | Not equivalent to NBT EVO activation. |
| NBT EVO ID4 | Early EVO interface, visually closer to NBT than the ID5/ID6 tile menu | Assess compatibility and a possible ID6 update individually. |
| NBT EVO ID5/ID6 | Graphical tile interface; ID5 and ID6 mainly differ in layout | CarPlay may be possible depending on hardware, equipment and software level. |
| EntryNav2 / EntryNav EVO | A separate head-unit family; check the specific unit for existing Wi-Fi hardware | Coding alone is insufficient without the required Wi-Fi hardware. For a suitable unit: conversion of the original unit including CarPlay by mail-in service or an agreed handover. First-generation EntryNav is not automatically included.Currently fully booked. Ask about the next mail-in slot. |
| MGU | Newer iDrive generation with a different software architecture | Do not treat it as NBT EVO. For a confirmed suitable configuration: remote MGU CarPlay activation. |
Appearance helps with an initial assessment, but is not conclusive proof. Themes, software updates and retrofitted head units can change how the system looks.
What NBT EVO ID4 typically looks like
ID4 is an early NBT EVO software interface. Its main menu usually resembles a vertical list and is closer to the classic NBT design. This is why ID4 is often misidentified as ordinary NBT, although an EVO head unit may already be operating beneath the interface.
Depending on hardware level, an ID4 system may be suitable for an update to an ID5/ID6 interface. Checks include the fitted hardware variant, available RAM and head-unit condition and software level. Early units may have technical limitations compared with later variants. A blanket promise based on a menu photo alone would therefore be inappropriate.
How do ID5 and ID6 differ?
ID5 and ID6 use the familiar tile interface. The most visible difference is the display and arrangement of tiles: ID6 looks more modern and often shows horizontally arranged content, some updated live. Both technically belong to the NBT EVO family; software data or diagnosis identifies the precise version more reliably than individual colours.
The ID5 or ID6 designation alone does not establish CarPlay compatibility. Head-unit variant, existing wireless hardware, equipment and software must also be considered. Where CarPlay is already activated, a split-screen view can often be changed to fullscreen on suitable systems. We offer a separate BMW fullscreen CarPlay service.
NBT EVO is not the same as NBT or MGU
The names are similar but describe different platforms. Software or activation intended for NBT EVO must not be applied to CIC, NBT or MGU. The year alone is insufficient, particularly during model changes and transition years. A particular iDrive controller or display shape does not reliably prove the head-unit type either.
MGU belongs to a newer infotainment generation. Menus and connected functions differ considerably, although adverts and forums sometimes inaccurately describe MGU vehicles as “NBT EVO”. Always identify the actual system for a correct assessment. For a confirmed suitable MGU configuration, we offer separate remote MGU CarPlay activation. This is not an NBT EVO or ID4-to-ID6 service.
Android Auto must be assessed separately from Apple CarPlay and a possible ID4-to-ID6 flash. Our BMW Android Auto compatibility guide explains when Operating System 7, Live Cockpit, Smartphone Integration and the specific software level matter.
Bimmerfit offers Android Auto activation via a patch for compatible NBT EVO units running ID5 or ID6. The package selector checks whether you have software version Y and active Apple CarPlay and shows whether you need an update or CarPlay activation.
EntryNav2 / EntryNav EVO without a Wi-Fi connection
If your navigation version shows Road Map … WAY, that points to EntryNav2 / EntryNav EVO (HU-B2). The map line alone tells you nothing about the Wi-Fi connector. For an initial check, send us the last seven VIN characters and a photo of the full map line. Include the part number or hardware version (HWEL) if you have it. An existing photo of the connectors also helps if the head unit has been replaced. Get your EntryNav checked on WhatsApp. BMW service bulletin on map families.
EntryNav2 / EntryNav EVO must also be distinguished from NBT EVO and MGU. If the original unit lacks the Wi-Fi hardware required for wireless CarPlay, software activation alone is insufficient. We offer an EntryNav2 / EntryNav EVO Wi-Fi retrofit including CarPlay for this case. The conversion includes work on the suitable original unit, a Wi-Fi antenna, a software update and the agreed activation; it is not performed entirely remotely. If the device already has Wi-Fi, a different scope may be sufficient. We first assess the VIN and, where needed, part number, HWEL or connector photos.
Which information can you find in the vehicle?
- Photograph the main menu: Take a clear photo showing the complete menu structure.
- Open the navigation version: Open Navigation in iDrive and press OPTION if needed. Depending on the menu, select Navigation system version or open the navigation settings and look for Position and version. Photograph the full “Road Map …” line and the separate software version if shown.
- Check software information: Record existing version details exactly, without abbreviating them.
- Have the last seven VIN characters ready: These are enough to start the check. We’ll ask for the full VIN if we need it to confirm the exact configuration.
- Disclose modifications: If the display or head unit has been replaced, we need the part number and component origin.
A map designation alone does not prove every hardware feature, but can help distinguish CIC, NBT, NBT EVO and newer systems. If the system is unclear, a remote ISTA diagnosis provides additional technical data.
If your NBT EVO with ID5 or ID6 and suitable Wi-Fi hardware is confirmed, see the CarPlay activation service. If you are unsure about the setup, use the compatibility check.
Is my BMW compatible with CarPlay?
For a reliable answer, we assess several factors together: head unit, software level, production period, equipment and required wireless hardware. On compatible NBT EVO systems, CarPlay may be activated depending on the starting condition. If required hardware is missing or a different system is fitted, coding alone is insufficient.
The desired display also matters. “Activate CarPlay” and “change existing CarPlay to fullscreen” are different jobs. A customer who already has CarPlay normally does not need complete new activation. Seeing a menu entry alone does not automatically mean the system works or has the required licence.
When does an ID4-to-ID6 flash make sense?
An upgrade can provide the more modern ID6 interface and, with suitable hardware, form the basis for further functions. First establish whether the head unit really is NBT EVO ID4, whether its hardware level is suitable and whether the vehicle communicates reliably. No flash is started with faults, an unstable power supply or unexplained modifications.
This is more extensive than ordinary comfort coding. A stable ENET connection, prepared Windows laptop and appropriate power support may be required. Bimmerfit confirms the exact requirements after an initial assessment. View the remote ID4-to-ID6 flash or the mail-in option for the removed head unit. Send the unit only after technical confirmation.
What matters with retrofitted head units?
A used or retrofitted head unit may contain vehicle data, activations and a software level from the donor vehicle. The job is therefore not equivalent to simple comfort coding. Part number, hardware level, origin, installation status and target configuration must match.
If another head unit is already fitted, disclose it before the appointment. For suitable cases, Bimmerfit offers a separate used BMW head-unit integration service.
If you need SSH access for technical work on your head unit, Bimmerfit can enable SSH on compatible NBT, NBT EVO, EntryNav EVO and MGU units. Have the exact head unit type and software version checked first.
Preparing for a remote assessment
- Last seven VIN characters, model and year;
- Main-menu and navigation-version photos;
- Description of the request: new CarPlay activation, fullscreen or ID4 update;
- Details of retrofitted components;
- Windows laptop, stable internet and a suitable ENET cable after confirmation.
If you do not have the cable yet, do not order based only on the year. Our ENET or K+DCAN guide explains the typical choices.
Primary sources for technical assessment
A BMW service bulletin explicitly distinguishes ID4 systems such as Entry Nav, Entry Media or NBT from ID5/ID6 with NBT EVO. BMW also explains that Smartphone Integration depends on the vehicle, equipment and further technical requirements; Apple documents iPhone-side requirements. These sources help assess the system, but do not replace a check of the actual fitted head unit.
- BMW service information about ID4 and ID5/ID6 (PDF)
- BMW: Smartphone Integration and technical requirements
- Apple: set up CarPlay and check requirements
Frequently asked questions about NBT EVO and CarPlay
Can I identify ID4 from the menu alone?
The interface is a useful indication, but not final confirmation. Software data, VIN, map designation or diagnosis increase certainty.
Does every ID6 system automatically have CarPlay?
No. Head unit, equipment, wireless hardware and software level must be suitable. ID6 primarily describes the interface or software generation.
Can ordinary NBT be flashed to NBT EVO ID6?
No. A software flash does not turn ordinary NBT into NBT EVO. This would require suitable hardware retrofitting and additional integration.
Is fullscreen the same as CarPlay activation?
No. Fullscreen expands the display of an existing compatible CarPlay system. New activation starts from a different situation.
Is the VIN sufficient for a retrofitted head unit?
No. The VIN mainly describes the original vehicle configuration. For modified vehicles, we also need photos and the part number of the actual fitted head unit.
Check NBT EVO and CarPlay before purchase
Send the last seven VIN characters, model, year and photos of the main menu and navigation version. We identify the system and recommend the appropriate service.